Will my new case fit my old computer hardware?

Question

hi my new case will be:

Model No. X-CRUISER-BK
Case Material Metal
Color Black
Main Board Standard ATX / Baby AT / Micro ATX

Window Yes

Power Supply N/A

Drive Space 4x5.25" / 2x3.5" / 4x3.5" (hidden)
Motherboard Size up to 11" x 12"
Expansion Slots 7
Front Panel Switch Power / Reset
Front Access Ports 2 x USB 2.0, 1 x Firewire, 2 x audio
Cooling Fan Space Up to 4 x case fans:
2 x 80mm fan - front (optional)
1 x 80mm UV blue LED fan - top (included)
1 x 80mm UV blue LED fan - rear (included) upgradable to 120mm fan.

Front Thermometer 1 x Temperature Gauge
Front Fan Controller 1 x Fan Speed Controller (controls up to 5 fans) + Fan Speed Gauge
Front Volume Controller 1 x Volume sensitivity controller + gauge
Led Display Power / HDD
Shipping Weight 19 lbs
Dimensions(DxWxH) 19.25" x 7.75" x 17"
Cu'ft 2.47'

whats in my old computer:

Intel Core i3-540 processor.
4gb PC3-10700 DDR3 RAM
500gb 7200 RPM SATA harddrive
DVD-RW Sata drive
Medion MS-7616 motherboard
There's also a 6-in-1 card reader on the front and I installed a second sound card for split audio for recording studio quality music.
the clock runs at 733mhz with 1.25 GB of graphic memory.
Radeon HD 5800 voltage tweek graphics card.


thank you.

Answer 1

just compare the size of both cases, if the new one is atx then yes everything should fit, obviously a micro atx case is much smaller and will depend on what size of motherboard you will be using

Answer 2

There are numerous issues to look out for. the 1st is the form of motherboard on your previous device. looking on this is style, it ought to no longer in good shape right into a greater modern case, or the mounting holes and that i/O slots won't line up amazing. in the experience that your available with consumer-friendly kit you may carry out a little trouble-free mods for the mounting to make it line up. in simple terms be careful of the place your floor pads are. you may ought to do away with mounts on the recent case that could touch etching on the Motherboard. the different concern may be the capability furnish. in case you purchase a case with a capability furnish in it it maximum probable would be an ATX style. If youo motherboard is anold AT type then you definately will ought to pass the capability furnish into the recent container.

Answer 3

Have you ever had the desire to walk inside a club and tell the folks there to rebel against foolishness?