WD mybook world edition 1TB LED not lighting up Problem?

Question

I have a WD NAS mybook world hdd 1TB (the old one) but the led rings wont turn on when I try to turn it on. I tried reseting the settings by pressing the reset button and connecting the drive, but the LEDs are not turning on. I also pressed the front button for 1 min but still no response.
When I plug it into the outlet, I can hear the HDD spinning but again the LED display is not lighting up.
Has anyone experienced this problem and know how to fix it?

Thanks

Answer 1

WD MyBooks are the worst external Hard Drives made. The power buttons usually stops working after 3 to 4 months... a year if you're lucky.

LaCie is probably the best External Hard Drive.

Answer 2

you should take a glance on the device Log to work out if it has something functional, notwithstanding it sounds to me as though the unit is incorrect. in case you sense like digging a splash, take a examine out right here formerly attempting to return it for an replace: - Are the white LED's on the front nevertheless lit formerly you cycle potential? if so, curiously like the OS locks up. - Is Twonky logging enabled? which could soak up an excellent sort of area, no count number if it rather is. - enable SSH on the stepped forward Mode - device - stepped forward internet site and log in with a freeware application called putty and notice what "df -h" says. which will instruct how a lot of each partition is getting used. cheers

Answer 3

try using a different usb cable it might work