Seagate Knowledge Base articles that discuss how to perform a Safely Remove Hardware action are Answer 2822, Answer 3207, and Answer 3494. When it does not complete the action successfully, the cause is usually a program that is trying to read from the drive. Of course, it is always a safe removal to shut down/reboot the computer and turn off/disconnect the drive while the computer's power is down, but that is not always a convenient solution. This document will explore several possible resolutions for the problem. Step 1: Try the drive on another computer so as to attempt to isolate the problem. If the problem does not repeat itself on the second computer, then it might well be system-related. If the problem follows the drive, then continue troubleshooting. Step 2: A process that can hold up the drive is "explorer.exe". This is because of the Windows Recycle Bin. The Recycle Bin may need to be disabled. Right-click on the Recycle Bin on the desktop. Select Properties. Select the Global tab. Select "Configure drives independently" (instead of "Use one setting for all drives" ). Select the USB drive letter tab on the top. Put a check in the "Do not move files to the Recycle Bin" checkbox. Click OK. Disabling the Recycle Bin will cause deleted files to be permanently deleted immediately. This option may not be available in Windows Vista. Step 3: If you have Norton System Works installed, the Safely Remove Hardware icon in the System Tray will not work with the external drive because of the Norton Protected Recycle Bin. If your Windows Recycle bin on the desktop has an "N" with a shield then Norton is running a special software on your system. This is a known issue. Please see Symantec's article on "How to Remove the Norton Protected Recycle Bin". Step 4: Other software like antivirus programs, or any programs or image files that remain open on the drive (even Windows Explorer if its window is open and displaying the contents of the external drive) can prevent safe removal. Close all programs and any open files or windows displaying the drive contents and attempt to remove the drive again. Step 5: In Windows Vista/XP/2000, please follow these directions: Right-click on My Computer (Computer in Vista) Select Manage. Select Device Manager. Open Disk Drives. Double-click on the hard drive's model number. Go to the Policies tab. Check whether the drive is set to Optimise for Quick Removal. If so, the hard drive does not need to be Safely Removed manually from the system. Just turn off the hard drive or disconnect it at your convenience whenever the hard drive is not busy transferring data. This way there is only a slim chance that the partition will be corrupted by a removal. This carries no risk for the drive hardware, but it does put your data at a small risk. Please remember that you would be very unwise to put yourself in a situation where that is a concern for you. If this drive were to experience a sudden mechanical or electronic failure or if it should fall, or if the drive's partition should become corrupted, your data could be lost and data recovery is very expensive. Remember that this is a backup drive, and a backup is defined as "a second copy of data in a second storage media". Whether on a second external hard drive, a CD or DVD, an internal hard drive, a network hard drive, or tape, make a 2nd copy of your data today and keep it. If not, please continue. Step 6: If the Windows Media Player Library is configured to monitor a folder on the external drive for new content it will not allow a Safe Remove. Instructions may vary depending on the version of Media Player. Open Media Player. From the top menu, choose Tools, then Options. Choose the Library tab. Click the Monitor Folders button. View the Advanced Options. Remove items that point to the drive letter used by the external drive (ie, E: or F:). Other multimedia applications may have similar issues if they automatically add new music to their library by monitoring file locations, specifically on the external drive. Step 7: If Windows Media Center is set to record shows, podcasts, etc. to the external drive, Windows may not allow the removal of the external drive. Step 8: For the Seagate Pocket drive - The Pocket drive Toolkit is constantly updating the free space of the drive and other information in order to display it to the user. You can use the Eject option in the Toolkit or exit the Toolkit software: Right-click on the Toolkit icon in the System Tray Choose Exit. This will release the drive and may allow you to safely remove the drive. Also, please see the linked-to Microsoft Support article on this topic.