windows could not start because missing file or corupt.\system32\hal.dll.?

Question

I could not start my computer, because of a missing file or corupt \system32\hal.dll

Answer 1

Boot from the installation CD and perform a repair. This will replace any corrupt or missing files. You probably want to run windows update after doing this to ensure you have the latest versions of any replaced files.

Answer 2

hi how are you? There are serval ordinary ordinary procedures to annoy this subject. One is as properly from the CD force making use of your device disk and fix the corrupted archives..you're able to try this by making use of occurring your BIO..startup your laptop and carry down delete key( ect) till the bio putting dsplay..then attempt to locate putting for BOOT series and alter CD to first boot. keep and go out out, then insert your device disk. that's going to detected the disk and purely fellow the course till you spot and option to repair or set up a sparkling reproduction(% fix) of WinX...desire i grew to become into some help..

Answer 3

Many people (including me) have (had) problems with the file hal.dll when installing on a fresh new harddisk. The proposed solutions do not

work in this case because there is a dynamic drive overlay (ddo) installed. The solution is quite simple: remove first the ddo (for

example with Seagate's DiscWizard: http://www.seagate.com/support/disc/drivers/discwiz.html) and re-install windows xp.



Generalized information:



This situation occurs when setting up a dual boot situation with Windows 2000 and Windows XP (it may occur with other setups). After Windows XP's install routine has finished copying files, and is ready to boot to the GUI portion of SETUP, you may receive the above error.



One possible fix. So far, this has been traced to an incorrect BOOT.INI file. To gain access to the Boot.ini:



Go to Start/Run and type in: msconfig. Then go to the Boot.ini Tab. Or...Right click the My Computer icon/Properties/

Advanced/Startup and Recovery/Settings/System Startup/Edit.



How to Edit the BOOT.INI File in Windows XP

http://support.microsoft.com/support/kb/articles/Q289/0/22.asp



This user had 1 hard drive, partitioned into C and D drives. His BOOT.INI file looked like this: (the erroneous lines are in "blue")



[boot loader]

timeout=1

default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Microsoft Windows XP Professional" /fastdetect

multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect



The 3 in the erroneous lines, above, points to the 3rd partition on the first physical hard disk. Since this user only had 2 partitions, this value was incorrect. Changing the value to 2, in both lines, allowed the user to complete Windows XP's setup.



The corrected BOOT.INI looked like this:



[boot loader]

timeout=1

default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect

multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect



HAL - Hardware Abstraction Layer



HAL is Microsoft's abbreviation for the Hardware Abstraction Layer, the technology and drivers that let the Windows NT, 2000, and XP operating systems communicate with your PC's hardware. HAL is one of several features--along with the NT file system (NTFS) that replaced the much less secure MS-DOS--that make NT-based operating systems more secure and reliable than Windows 95, 98, and Me.



HAL prevents applications from directly accessing your PC's system memory, CPU, or hardware devices (such as video and sound cards)--a method that can prevent many device conflicts and crashes. Unfortunately, HAL sometimes also slows or stops DOS games and programs, which need to load their own memory managers or control hardware directly for better performance.



With HAL in the way, developers must rewrite or even abandon their older software in favor of newer, HAL-compatible versions. Microsoft has pressured hardware makers to provide or support technologies such as MMX, DirectX, and 3D graphics language OpenGL, all of which allow fast but indirect access to the advanced high-performance features of video, sound, and CPU hardware. Such access also makes for a better visual experience when using Windows for Web and productivity applications; improved graphics performance is evident all over Windows XP's new user interface.



XP also offers some new compatibility-mode features that let you run programs meant to run under earlier operating systems, but, frankly, most DOS-based and even some Windows-based games simply won't work with the new OS.



Tip: To see which HAL is currently installed, open Device Manager, and expand the Computer branch. The entry that

appears in this branch corresponds to the currently installed HAL.



Situations in Which Windows May Not Start in Safe Mode

How to Troubleshoot Hardware Abstraction Layer Issues

How to Move a Windows XP Installation to Different Hardware

Setup Error Msg: Cannot find file: \Windows\System32\hal.dll



HAL.DLL is Missing - Updated by MVP Alex Nichol



Option 1:



Boot from your CD and follow the directions to start Recovery Console. Then:



Attrib -H -R -S C:\Boot.ini

DEL C:\Boot.ini

BootCfg /Rebuild

Fixboot

Answer 4

outch.

Phps you can find a friend who has the same OperatinSystem with a DOS Floppy u can boot an copy the file to the respective place.



Then try rebbot

Answer 5

i had same problem once u have to install ur disk u originally get with the computer to reboot it.